Mikeinnc,
> Hello - I apologise if this has been answered
> before, but I can't seem to find comments that
> confirm, or otherwise, that the methods discussed
> here will work with a NSA325v1 box? I've built a
> FAT USB and loaded the files from the early pages
> of this discussion, and when I boot with the USB
> stick in place, it appears to work, and I assume
> the correct environment variables get loaded (oh,
> and yes, I have serial access so can see all that
> happens).
The NSA325 v1/v2 is already supported with new u-boot uboot.2017.07-tld-1.nsa325.bodhi.tar and Debian rootfs Debian-4.12.1-kirkwood-tld-1-rootfs-bodhi.tar.bz2
There is no need to do anything different. This is the working thread so a lot were experimentals.
> Hello - I apologise if this has been answered
> before, but I can't seem to find comments that
> confirm, or otherwise, that the methods discussed
> here will work with a NSA325v1 box? I've built a
> FAT USB and loaded the files from the early pages
> of this discussion, and when I boot with the USB
> stick in place, it appears to work, and I assume
> the correct environment variables get loaded (oh,
> and yes, I have serial access so can see all that
> happens).
The NSA325 v1/v2 is already supported with new u-boot uboot.2017.07-tld-1.nsa325.bodhi.tar and Debian rootfs Debian-4.12.1-kirkwood-tld-1-rootfs-bodhi.tar.bz2
There is no need to do anything different. This is the working thread so a lot were experimentals.