cratsil1979,
Because you have multiple drives during boot, and the default envs on uboot-2014.07 did not take care of that automatically. So the kernel does not know which drive is the system drive.
Try again with this newer script uboot.2016.05-tld-1.environment.scr in this post:
http://forum.doozan.com/read.php?3,29362,29390#msg-29390
Even though it was for u-boot-2016.05, it should work the same way for your current installed u-boot-2014.07.
------
By the way, once you booted into Debian, you should install the latest u-boot
Because you have multiple drives during boot, and the default envs on uboot-2014.07 did not take care of that automatically. So the kernel does not know which drive is the system drive.
Try again with this newer script uboot.2016.05-tld-1.environment.scr in this post:
http://forum.doozan.com/read.php?3,29362,29390#msg-29390
Even though it was for u-boot-2016.05, it should work the same way for your current installed u-boot-2014.07.
------
By the way, once you booted into Debian, you should install the latest u-boot
Quote
Last Updated 19 June 2016
I've uploaded 2016.05-tld-1 U-Boot images for Pogo E02, GoFlexNet, GoFlex Home, Dockstar, Pogo V4/Mobile, iConnect, Netgear Stora, Sheevaplug, NSA320, NSA325, NSA310S/320S, NSA310, and HP-T5325.