Re: NSA 325 V2 Debian Is Possible!

bodhi Wrote:
-------------------------------------------------------
> lille,
>
> Try the revised envs:
>
>

> setenv bootcmd_stock 'setenv mainlineLinux no; set
> env bootargs $(bootargs_stock); nand read.e $(load
> addr) $(kernel_addr) 0xA00000; bootm $(loadadr)'
> setenv bootcmd 'run bootcmd_linux; run bootcmd_sto
> ck; reset'
> boot
>

still stopping after 'done, booting the kernel' with no usb stick inserted

Hit any key to stop autoboot: 0
Marvell>> setenv bootcmd_stock 'setenv mainlineLinux no; setenv bootargs $(bootargs_stock); nand read.e $(loadaddr) $(kernel_addr) 0xA00000; bootm $(loadadr)'
Marvell>> setenv bootcmd 'run bootcmd_linux; run bootcmd_stock; reset'
Marvell>> boot
(Re)start USB...
USB: scanning bus for devices... 2 USB Device(s) found
Waiting for storage device(s) to settle before scanning...
0 Storage Device(s) found
** Bad partition 1 **
** Bad partition 1 **
## Booting image at 02000000 ...
Bad Magic Number

NAND read: device 0 offset 0xc80000, size 0xa00000

Bad block at 0xc80000 in erase block from 0xc80000 will be skipped
Reading data from 0x169f800 -- 100% complete.
10485760 bytes read: OK
## Booting image at 02000000 ...
Image Name: Linux-2.6.31.8
Created: 2013-12-19 6:31:22 UTC
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 5756136 Bytes = 5.5 MB
Load Address: 00008000
Entry Point: 00008000
Verifying Checksum ... OK
OK

Starting kernel ...

Uncompressing Linux.............................................................................................................................................................................................................................................................................. done, booting the kernel.