Re: NSA 325 V2 Debian Is Possible!

bodhi Wrote:
-------------------------------------------------------
> lille,
>
> >
> > BTW, I am not willing to install your U-boot, be
> ca
> > use I want to boot to stock rootfs and your U-bo
> ot
> > version doesn't allow this until today afaik.
>
> That's OK. No need to install new u-boot if you st
> ill want to boot stock.
>
> This booting problem is simple. Your rootfs uImage
> needs to have the DTB appended to it (because you
> are booting with stock u-boot). Use the kirkwood-
> nsa325.dtb insteadt of kirkwood-goflexnet.dtb in t
> he instruction quoted below.
>
>

Quote

4. Create uImage and uInitrd and setup for
> booting.
>
> ....
>
> 4b. Boot with DTB file embedded in the kernel imag
> e (no U-Boot envs changes are needed if your syste
> m already booting on USB or HDD)
>
> Again, please replace kirkwood-goflexnet.dtb below
> with the correct DTB name for your box.
>
> Generate the uImage and uInitrd:
>

> cd /boot
> mv uImage uImage.orig
> cp -a zImage-4.8.0-kirkwood-tld-1  zImage.fdt
> cat dts/kirkwood-goflexnet.dtb  >> zImage.fdt
> mkimage -A arm -O linux -T kernel -C none -a 0x000
> 08000 -e 0x00008000 -n Linux-4.8.0-kirkwood-tld-1
> -d zImage.fdt  uImage
> mkimage -A arm -O linux -T ramdisk -C gzip -a 0x00
> 000000 -e 0x00000000 -n initramfs-4.8.0-kirkwood-t
> ld-1 -d initrd.img-4.8.0-kirkwood-tld-1 uInitrd
> 

sorted this out already by reading the http://forum.doozan.com/read.php?2,12096 thread properly, sorry my fault.

but how to boot to stock rootfs when usb stick with your debian rootfs is not inserted?