Kuki,
There are 2 installation threads here:
Released kernel/rootfs: http://forum.doozan.com/read.php?2,12096
Released u-boot: http://forum.doozan.com/read.php?3,12381
It will not be possible to boot stock FW after installing new u-boot. At least not yet (I have not tried this, since it is low priority on my list).
> Which kernel should I take (and from where) for
> the NSA325v2? The linked Kirkwood kernel?
Take the kernel from the release thread above if you want to keep your rootfs and run with new kernel. If you just want to install new kernel, then it is best that you post the dmesg output from the existing Debian installation on your box, so I can be sure if it will work.
Take the rootfs from the release thread above if you can start from beginning. This is the best way. And also install new u-boot if you don't care about stock FW.
There are 2 installation threads here:
Released kernel/rootfs: http://forum.doozan.com/read.php?2,12096
Released u-boot: http://forum.doozan.com/read.php?3,12381
It will not be possible to boot stock FW after installing new u-boot. At least not yet (I have not tried this, since it is low priority on my list).
> Which kernel should I take (and from where) for
> the NSA325v2? The linked Kirkwood kernel?
Take the kernel from the release thread above if you want to keep your rootfs and run with new kernel. If you just want to install new kernel, then it is best that you post the dmesg output from the existing Debian installation on your box, so I can be sure if it will work.
Take the rootfs from the release thread above if you can start from beginning. This is the best way. And also install new u-boot if you don't care about stock FW.