Unknown532 Wrote:
-------------------------------------------------------
> How is it possible to boot back to stock? If I
> unplug the usb stick, the device stuck at "Bad
> magic number" like described at the guide, but I
> have read, that normally if there is no usb
> device, the NAS will boot to stock...
>
> Edit:
>
> I have tried it with "setenv bootcmd 'run
> to_stock', but the system is not booting with ##
> "Error: "bootcmd_stock" not defined"
>
> Any Ideas?
If you are still running stock u-boot then yes, it possible to boot into stock.
If you have installed the new u-boot then no, it won't boot into stock again (not yet). This is something on my TODO list, but low priority.
-------------------------------------------------------
> How is it possible to boot back to stock? If I
> unplug the usb stick, the device stuck at "Bad
> magic number" like described at the guide, but I
> have read, that normally if there is no usb
> device, the NAS will boot to stock...
>
> Edit:
>
> I have tried it with "setenv bootcmd 'run
> to_stock', but the system is not booting with ##
> "Error: "bootcmd_stock" not defined"
>
> Any Ideas?
If you are still running stock u-boot then yes, it possible to boot into stock.
If you have installed the new u-boot then no, it won't boot into stock again (not yet). This is something on my TODO list, but low priority.