Re: NSA 325 V2 Debian Is Possible!

@hans,

Good work! It will be a good reference for people who want to install with new Debian rootfs only.

Suggestion: put these commands (and other commands in your post) in a code tag so it is easier to read (so lines don't wrap):

fw_setenv arcNumber 4495 
fw_setenv mainlineLinux yes 
fw_setenv bootargs_stock 'console=ttyS0,115200 mtdparts=nand_mtd:0x100000(uboot),0x80000(uboot_env),0x80000(key_store),0x80000(info),0xA00000(etc),0xA00000(kernel_1),0x2FC0000(rootfs1),0xA00000(kernel_2),0x2FC0000(rootfs2) root=/dev/nfs rw init=/init' 
fw_setenv bootargs_linux 'console=ttyS0,115200 mtdparts=nand_mtd:0x100000(uboot),0x80000(uboot_env),0x80000(key_store),0x80000(info),0xA00000(etc),0xA00000(kernel_1),0x2FC0000(rootfs1),0xA00000(kernel_2),0x2FC0000(rootfs2) root=LABEL=rootfs loglevel=8' 
fw_setenv bootcmd_linux 'setenv bootargs $(bootargs_linux); mw.l f1010100 0020c000; usb reset; ext2load usb 0:1 $(loadaddr) /uImage; ext2load usb 0:1 0x01100000 /uInitrd; bootm $(loadaddr) 0x01100000' 
fw_setenv bootcmd_stock 'setenv bootargs $(bootargs_stock); nand read.e $(loadaddr) $(kernel_addr) 0xA00000; bootm $(loadadr)' 
fw_setenv to_stock "setenv mainlineLinux no; setenv bootcmd \'run bootcmd_stock\'; saveenv; reset" 
fw_setenv to_linux "setenv mainlineLinux yes; setenv bootcmd \'run bootcmd_linux\'; saveenv; reset" 
fw_setenv bootcmd 'run to_linux'